AISI T1 | T1 | DIN 3355 |
---|
Virat Special Steels is the biggest provider & Stockiest of AISI T1 Steel.
AISI T1 is a tungsten kind tool steel. Very high resistance to put on and to softening. Just right longevity , reducing potential & deep hardening response. This grade is on the whole used for turning, planning & slotting instruments, tapes, twist drill, threading dies, profile slicing instruments, broaching instruments & reamers.
Standard hiqh-speed steel qrade. Itswell-balanced alloycomposition forms the basis of its high_touqhness and good clll:ting edge retention, render'lng it suitable for a large variety of applications.
Thermal Conductivity at °C | 20 | 350 | 700 |
---|---|---|---|
W/(m*K) | 32.8 | 23.5 | 25.5 |
For all metal-cutting tools for roughing or finishing such as twist drills, diverse milling cutters, thread dies, broaches, reamers, countersinks, thread chasers, circular saw segments, shaping tools and woodworking tools. Also highly suitable for cold-forming tools such as cold extrusion rams and dies, as well as cutting and precision cutting tools, plastic moulds with elevated wear resistance and screws.
Soft annealing °C | Cooling | Hardness HB |
---|---|---|
870-900 | slowly | max. 270 |
Stress-relief annealing °C | Cooling |
---|---|
630 - 650 | Furnace |
1st pre-heating °C | 2nd and 3rd | Hardening °C | Quenching | Tempering °C | Hardness after Teperature HRC |
---|---|---|---|---|---|
up to approx. 400 in an air-circulating furnace | 850 and 1050 | 1190 - 1230 | Saltbath, at least 550 °C Oil ,Air | at least twice 530-560 | 64 – 66 |